Timney Triggers Browning X-Bolt Trigger

**Depending on which stock you have on your rifle, it may be necessary to remove a small amount of material to give the safety transfer bar adequate clearance. **When this Timney trigger is installed, the factory bolt lock feature (i.e. Bolt will not open when on &';Safe&';) is DISABLED allowing the bolt to open while the rifle is on &';Safe&';. Timney is the market leader in true drop-in replacement triggers due to its precision engineering. This drop-in trigger gives a crisp, clean break every time for repeatable accuracy shot after shot. From the factory, the trigger is set to 3 lbs and can be adjusted from 1.5 lbs - 4 lbs. With Sear engagement technology and the ease of adjustment with a single hex wrench, this trigger is truly something that hunters and firearm enthusiasts need. This trigger also features adjustable Overtravel (follow-through) giving you complete control of how the trigger functions. Trigger Adjustment Tips The Timney Browning X-Bolt Trigger is fully adjustable for Sear Engagement (Creep), Overtravel (Follow-through) and pull weight. Adjustment of the pull weight is completed by turning the pull weight screw with a 5/64 hex Wrench. Adjustment of the sear engagement and overtravel is completed using a .050 hex Wrench. Sear Engagement:Sear engagement controls the amount of movement the trigger has before it breaks. Sear engagement is custom set at the Timney Factory and shouldn&';t need adjustment. However, if you want to adjust your triggers sear engagement (Creep) the procedure is as follows: With the rifle unloaded and cocked. Engage safety. Turn the sear engagement screw clockwise until it stops. Slowly turn it counterclockwise 1/8 of a turn or one flat of the .050 hex wrench. The safety should move freely but the trigger should not move when the safety is engaged.Overtravel: Overtravel (Follow Through) is the distance the trigger moves after it fires. Timney Triggers adjust the overtravel to factory specifications but overtravel is a matter of preference and can be increased or decreased to match your choice. The over-travel screw is on the front of the housing just above the pull-weight screw. With the trigger in the fired position and using a .050 hex wrench, turn the screw clockwise until it stops. Once the screw stops, turn the screw counterclockwise 1/8 of a turn or one flat of the hex wrench. Squeeze the trigger as you turn the screw to the desired amount of follow-through. BE CAREFUL if the overtravel is set too tight the trigger will not fire.Pull Weight: Pull weight is controlled by the bottom screw on the front of the housing. Using a 5/64 hex wrench turn the screw clockwise to increase the pull weight or counterclockwise to decrease the pull weight. From the factory, the pull weight is set at 3 lbs. Specs Weight 2.1 oz Adjustable Trigger Yes Trigger Pull 1.5 lbs - 4 lbs Style Curved Material Steel Finish Black Compatible With First Generation X-Bolt (Not X-Bolt 2) Manufacturer Warranty Lifetime warranty