Timney Triggers Winchester 70 Trigger

The Timney Triggers Winchester 70 Trigger is the perfect replacement for your stock Winchester Model 70 hunting rifle trigger. Its factory-calibrated setup provides you with consistent accuracy, while its adjustable creep, follow-through, and pull weight allow for a custom feel. Easy to install with no gunsmith required, you&';ll be ready to shoot in no time. Trigger Adjustment Tips The Timney Winchester 70 Trigger is fully adjustable for Sear Engagement (Creep), Overtravel (Follow-through) and pull weight. Adjustment of the pull weight is completed by turning the pull weight screw with a 5/64 hex Wrench. Adjustment of the sear engagement and overtravel is completed using a .050 hex Wrench. Sear Engagement Sear engagement controls the amount of movement the trigger has before it breaks. Sear engagement is custom set at the Timney Factory and shouldn&';t need adjustment. However, if you want to adjust your triggers sear engagement (Creep) the procedure is as follows: With the rifle unloaded and cocked. Engage safety. Turn the sear engagement screw clockwise until it stops. Slowly turn it counterclockwise 1/8 of a turn or one flat of the .050 hex wrench. The safety should move freely but the trigger should not move when the safety is engaged.Overtravel: Overtravel (Follow Through) is the distance the trigger moves after it fires. Timney Triggers adjust the overtravel to factory specifications but overtravel is a matter of preference and can be increased or decreased to match your choice. The over-travel screw is on the front of the housing just above the pull-weight screw. With the trigger in the fired position and using a .050 hex wrench, turn the screw clockwise until it stops. Once the screw stops, turn the screw counterclockwise 1/8 of a turn or one flat of the hex wrench. Squeeze the trigger as you turn the screw to the desired amount of follow-through. BE CAREFUL if the overtravel is set too tight the trigger will not fire.Pull Weight: Pull weight is controlled by the bottom screw on the front of the housing. Using a 5/64 hex wrench turn the screw clockwise to increase the pull weight or counterclockwise to decrease the pull weight. From the factory, the pull weight is set at 3 lbs. Specs Weight 1.3 oz Adjustable Trigger Yes Trigger Pull 1.5 lbs - 4 lbs Style Curved Material Steel Finish Black Compatible With Winchester Model 70, Winchester Model 70 75th Anniversary Super Grade Manufacturer Warranty Lifetime warranty