Evolution Gun Works Leupold DeltaPoint Pro Sight Mount JPoint Redfield Accelerator and Optima Colt Gold Cup 1.604in Aluminum Matte Black Hardcoat

Evolution Gun Works Leupold DeltaPoint Pro Sight Mount JPoint Redfield Accelerator and Optima Colt Gold Cup 1.604in Aluminum Matte Black Hardcoat. The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with our mount in order to mount your Leupold DeltaPoint Pro JPoint Redfield Accelerator or Optima red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This Mount Fits: Colt Gold Cup Colt Trooper Mark 3 Colt Python Colt Anaconda This is for Colt models with the Elliason style adjustable rear sight. The elevation screw from the original rear sight is re-used in the center hole on this mount unless you have an Anaconda. An extra screw is available for purchase. Anacondas require a new elevation screw due to the design of the elevation screw supplied with the gun. NOTE: For this mount to work with the Holosun 407K and 507K the rear pins on the mount MUST be removed by milling or filing. Installation Instructions: Remove the rear sight Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mountwill make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Specifications for Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For Colt Gold Cup Python Anaconda: Manufacturer: Evolution Gun Works Red Dot Sights-Footprint: Deltapoint Pro Included Accessories: Screws Optic Cut: Not Applicable Fabric/Material: 7075 Aluminum Color: Black Mount Type: Dovetail Fit: Colt Delta Gold Cup Sight Length: 1.604 in Width: 0.99 in Finish: Matte Black Hard Coat Anodized Gun Make: Colt Gun Type: Pistol Features of Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For Colt Gold Cup Python Anaconda: Fit Leupold DeltaPoint Pro JPoint Shield RMS/RMSc/SMS Redfield Accelerator Optima Holosun 407K/507K (the rear pins on the mount must be removed for the Holosun 407K/507K to sit on the mount) Package Contents: Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For Colt Gold Cup Python Anaconda Evolution Gun Works 49421: Leupold DeltaPoint Pro fits JPoint Redfield Accelerator and Optima Mount for Colt Gold Cup 1.604 in Aluminum Matte Black Hardcoat