Evolution Gun Works Trijicon RMR Sight Mount Ruger PC Carbine 1.780in Aluminum Matte Black Hardcoat

Mounting Hardware is Included This Mount Fits: Camp Carbine 9mm (does not fit the early models, the hole spacing is different) Camp Carbine 45 Glenfield 30 Henry Big Boy (H006) Henry 3030 (H009) Henry 4570 (H010) Henry Big Boy (H012) Henry Long Ranger (H014) Henry .410 (H018) Only fits the 20" Barrel Henry Side Gate Lever Action (H024) Henry Long Ranger Henry Homesteader (must use rear holes on receiver) Marlin 1895 Marlin 1894 Marlin 336 Marlin 375 Marlin 444 Marlin Model 36 Ruger PC Carbine (This mount only works with the Ruger PC Carbines that do not have the AR style handguard.) FEATURES Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.780" Overall Width: 1.1" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Trijicon RMR / SRO, Holosun HE407C / HE507C / HS407C / HS507C, Swampfox Kingslayer / Liberty / Justice Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions- Remove the rear sight*- Install the EGW Sight Mount- Tighten set screw (if applicable)- Place the red dot sight on the EGW Sight Mount(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)- Apply blue Loctite to the provided mounting screws- Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trijicon RMR The screws that are included with this mount require a 5/64&';&'; allen wrench for installation.