Evolution Gun Works Vortex Viper/Venom fits Burris FastFire and Docter Sight Mount For Sig P365 Optics Ready Black

Evolution Gun Works Vortex Viper/Venom fits Burris FastFire and Docter Sight Mount For Sig P365 Optics Ready Black. Simply remove the sight plate on your gun and replace it with our mount in order to mount your Vortex Viper Vortex Venom Burris FastFire or Docter red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Mounting Hardware is Included This mount fits: Sig Sauer P365X Optics Ready Sig Sauer P365XL Optics Ready Sig Sauer P322 Optics Ready (Need to remove the recoil lug to work) This mount does not fit: Sig Sauer P365 SAS Installation Instructions - Remove the rear sight plate - Install the EGW Sight Mount on the slide - Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) - Apply blue Loctite to the provided mounting screws - Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation. Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. Specifications for Evolution Gun Works Vortex Viper/Venom fits Burris FastFire and Docter Sight Mount For Sig P365 Optics Ready: Manufacturer: Evolution Gun Works Color: Black Gun Model: SIG Sauer P365 Included Accessories: Standard Optic Cut: Burris Fastfire Hand: Ambidextrous Condition: New Red Dot Sights-Footprint: Docter Package Contents: Evolution Gun Works Vortex Viper/Venom fits Burris FastFire and Docter Sight Mount For Sig P365 Optics Ready (2) 6-32 x 5/16" Button Head Screws - Requires 5/64 Wrench or Driver (2) 6-32 x 3/8" Flat Head Screws - Requires 5/64 Wrench or Driver (2) M3 x .5 x 8mm Flat Head Screws - for mounting the plate to the slide - Requires use of 2mm Hex Key Evolution Gun Works 49282: Vortex Viper/Venom fits Burris FastFire and Docter Sight Mount For Sig P365 Optics Ready Black