Forward Controls Design - Full size Glock Gen 5 MOS compatible mouting plate for EOTech EFLX

OPF-G, EFLX is compatible with GLOCKs that use GLOCK's G17, G19, G45, G47, G49, G20, G21 G22, G23, G26, G34, G40, all but the slim line Glocks (G43X and G48).OPF-G, EFLX is compatible with the Leupold's Delta Point Pro. If the plate engraving says DPP only, it is the same plate we use for both DPP and EFLX.DPP sight to plates are longer, while EFLX uses shorter screws. Do not use DPP sight to plate screws with the EFLX.Note that OPF-G, EFLX comes with plate to slide mounting screws, but not the sight to plate screws that will with EFLX sight.OPF-G, EFLX (Optics Platform, Forward Controls, EFLX ) is compatible with EOTech's new EFLX sight. OPF-G, EFLX uses the same proven design of the OPF-G, RMR to keep the EFLX immobile, the simplest and most effective way to prevent sight to plate mounting screws from loosening and shearing.While EFLX uses 4 recoil lugs (twice as that of the RMR's) and beefier mounting screws, the challenges of keeping the sight on the plate without loosening or shearing the sight to plate screws are not very different from those of the RMR. OPF-G, EFLX has a front and rear fence, the tight tolerances of the plate to slide, and sight to plate insures minimum movement along the bore in recoil.OPF-G, EFLX ships with 2 plate to slide screws (M3 0.5mm x 6mm), a T10 wrench, and a packet of VC-3. A torque wrench is necessary to properly install both the plate to slide, and sight to plate screws. EFLX sight to plate screws are not included, as they are shipped with the EFLX sight.Torque value:Plate to slide: 13in/lbSight to plate: 20 to 25 in/lbNote that OPF-G, EFLX comes with plate to slide mounting screws, but not the sight to plate screws that will with EFLX sight.