Manticore Arms X95 Cantilever Forend Gen 2 OEM Height Top Rail Black Medium

Manticore Arms X95 Cantilever Forend Gen 2 OEM Height Top Rail Black Medium. This is a bit lower than the rail used on guns like the AR-15 but if you find the height of the OEM rail just right you will want to go with this top rail height In addition the top rail is cut for the 300 blackout gas adjustment access in case you are mounting on a 300 Blackout X95. The second component is the forend itself which is 2in longer than the OEM forend features 3 rows of M-LOK (13 slots) on each side plus 2 QD points on each side and 5 slots of M-LOK on the underside. The center row of M-LOK on the sides and the underside row on M-LOK is centered on the bore line making it much easier to zero lasers and other items that are bore line sensitive. The top of the forend features two L-shaped tabs that engage matching slots on the top rail. To install the forend portion just slide the forend into the slots on the top rail along the axis of the barrel make sure the alignment tab on the underside engages the opening in the receiver tighten the cross bolt screw and you are ready to go with a rock solid mounted forend. This along-the-bore-axis installation allows the additional benefit of being able to install a suppressor up to 1.5in in diameter on the barrel and the forend can easily be slid on and off without need to remove the suppressor. Not wanting to leave an opening where the lower plastic tab of the OEM forend engages we have included a polymer filler block that blends perfectly with the receiver to keep everything closed up and tidy. The forend and top rail are connected via a tongue and groove rail system and are secured together with screws for stable mounting and no movement. One last benefit- with X95 Cantilever forend THE BARREL IS NOW FREE FLOATED (as much as is possible with the X95- the top rail mounts to the gas block assmebly at the base of the barrel). No more contact of the barrel as with the OEM polymer forend and its two barrel mounted polymer support points as the X95 Cantilever Forend is completely supported by the top rail and the receiver. Specifications for Manticore Arms X95 Cantilever Forend Gen 2 OEM Height Top Rail: Manufacturer: Manticore Arms Gun Make: Israel Weapon Industries (IWI) Gun Model: IWI Tavor X95 Handguard Length: 8.35 in Color: Black Finish: Type III Milspec Black Anodizing Gun Rail: Full Top Rail Outer Diameter: 1.9 in Inner Diameter: 1.6 in Handguard Material: 6061 Aluminum Weight: 1.22 lb Condition: New Mount Type: Cantilever Mount Fabric/Material: 6061 Aluminum Gun Type: Rifle Package Contents: Manticore Arms X95 Cantilever Forend Gen 2 OEM Height Top Rail Instruction Sheet Mounting Hardware And Allen Wrenches Polymer Filler Block This product is compatible with the following gun models: IWI Tavor X95 Manticore Arms MA-27505: X95 Cantilever Forend Gen 2 OEM Height Top Rail Black Medium