Stoner CNC Cross Hatch G10 Gun Grips fit Taurus PT1911 Black PT1911-Magwell

Stoner CNC Cross Hatch G10 Gun Grips fit Taurus PT1911 Black PT1911-Magwell. They are made on a CNC mill out of a material called G10 which is one of the best materials for handgun grips and the only one that can provide this specific look. Its much tougher than wood or acrylic. It won't absorb moisture and doesn't scratch very easily. The material is tough as nails and will last normal shooters a life time. Frame Sizes: 1911 Full Size - All mill spec 1911's with roughly 3 1/16in between bolts (Colts Kimbers RIA Remington Smith and Wesson and many others) 1911 Compact and Springfield EMP - 1911 Compacts with roughly 2 11/16in between bolts... grips are compatible between the 1911 Compacts and EMP's where others are not. Taurus PT1911 - Cutter wider to fit the PT1911 Frame (.235 Thickness Drilled out for PT1911 Bolts) Sig GSG - Resolves issues on ambi cut and metric bolts. Bottom Cuts: Standard Bevel - Most people need this option. Has a 30-degree taper and a notch for the MSP Magwell - If your gun has a magwell you probably want this option straight 90 cuts on the bottom with a covered MSP. Clip on Magwell - If you want to install a Wilson Combat 188 magwell you need this option Other Bottoms Cuts (For Full Size Only) Bobtail - you probably have an Ed Brown or Dan Wesson bottom corner of the grip is cut off and beveled OR Round Butt - The bottom corner of the grip is rounded for guns like Sig Nightmare S&W E-Series Kimber Super Carry Pro. Thickness: Standard - 270in works well for most people Thin - 187in inch works well for CCW guns and people with small hands requires slim line bushings and screws G10 can vary a little bit in color and thickness of grips can affect the look slightly. Does NOT fit Springfield EMP 4. When switching to slim line grips be sure to use appropriate slim line bushings and screws. Buyer subject to restock fees if bought for the wrong gun. Specifications for Stoner CNC Taurus PT1911 Cross Hatch G10 Gun Grips: Manufacturer: Stoner CNC Finish: CNC Machined Fabric/Material: G10 Gun Make: Taurus Gun Model: Taurus PT1911 Features of Stoner CNC Taurus PT1911 Cross Hatch G10 Gun Grips Choose a frame 1911 Full Size 1911 Compact and Springfield EMP Taurus PT1911 or SIG GSG Choose a Bottom Cut - Standard Magwell Clip on magwell (also known as 188 magwell) Bobtail (1911 Full Size Only) Round Butt (Full Size Only) Standard Thickness of 270in or slim 187in inch works well for CCW guns and people with small hands... requires slim line bushings and screws Ambi Notch Standard - Thumb Notch Standard - CNC Machined - Fully De-horned G10 Material Cross Hatch Textured Design - Package Contents: Stoner CNC Taurus PT1911 Cross Hatch G10 Gun Grips Stoner CNC STO-PT19-CH-MAG-BLK: Cross Hatch G10 Gun Grips fit Taurus PT1911 Black PT1911-Magwell