Trijicon RMR / SRO, Holosun 407c / 507c Mount for CZ TS 2

Mounting Hardware is Included This mount fits: CZ TS 2 Models CZ 75 Tactical Sports CZ TS Czeckmate CZ Ts Orange This mount does not fit: Does not fit ANY/ALL CZ slides that are already cut for optics. *We have found that our mount may work with some models of the 75 SP-01 Shadow and may not work with others. Please measure the depth of the dovetail cut from the front of your slide. If the depth measures .133", our mount will not be a drop in part for your application. FEATURES Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.780" Overall Width: 1.1" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw Red Dot Fitment: Trijicon RMR / SRO, Holosun HE407C / HE507C / HS407C / HS507C, Swampfox Kingslayer / Liberty / Justice Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions- Remove the rear sight*- Install the EGW Sight Mount in the dovetail- Tighten set screw (if applicable)- Place the red dot sight on the EGW Sight Mount(placing a small piece of paper between the red dot sight and the sight mountwill make for easier removal and will keep Loctite off of the red dot sight.)- Apply blue Loctite to the provided mounting screws- Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trijicon RMR The screws that are included with this mount require a 5/64&';&'; allen wrench for installation.