Warne Hyperlite MSR 1-Piece Cantilever Picatinny Scope Mount 30mm Rings AR-15 Matte Black

Warne HyperLite MSR Mount Matte Black 30mm MSR Height Black. Crafted from our exclusive MagnaFusion Alloy this 1-piece mount offers a staggering 35percent weight reduction over traditional aluminum mounts without compromising on strength or stability while providing an unbeatable foundation for your optic. Scope Mount fits: AR-15 M-4 SR-25 LR308 PTR-91 and any other MSR with a Picatinny rail that is at least 3 inches long. Always verify that your firearm is UN-LOADED before performing any service on it. Warne recommends that you loosely assemble rings and scope onto firearm prior to final mounting to verify eye relief and ring spacing. IMPORTANT: NEVER OVER TIGHTEN ANY BASE OR RING SCREW. NEVER ATTACH A SCOPE IF THE OBJECTIVE TOUCHES THE BARREL OR CAUSES INTERFERENCE WITH THE BOLT SAFETY OR CYCLING OF THE ACTION. ALWAYS FOLLOW THE FIREARM OR SCOPE MANUFACTURERS RECOMMENDED TORQUE SPECIFICATIONS. YOU ARE RESPONSIBLE FOR YOUR OWN GUNSMITHING METHODS. If you are unsure or do not have the proper tools please contact a gunsmith for assistance Warne will not be held liable for stripped/damaged receivers or scopes. Push the mount towards the muzzle and tighten cross bolts to 30 in-lb. Remove the four cap screws from each top cap with the supplied T-15 wrench and remove the top caps. Place scope in rings and reinstall cap screws leave loose. Adjust scope position for eye relief and level reticle. Level the reticle and then tighten the cap screws in a crisscross pattern to scope manufactures recommended torque setting. Specifications for Warne HyperLite MSR Mount: Manufacturer: Warne Color: Matte Black Features of Warne HyperLite MSR Mount 35percent lighter than standard aluminum MSR mounts. Integrated recoil lug and dual-screw clamps maintain zero even under the harshest recoil. Precision CNC machined and topped with Cerakote to ensure flawless performance in any environment. STANAG 4694 interface allows for better return to zero and rigidity. Fits both picatinny & weaver style bases. Loosen both nuts on the mount and install on your Picatinny style rail with the cantilever forward Warne recommends mounting the 1 piece with the front cross bolt in the farthest forward slot on AR15 Flat Tops. Package Contents: Warne HyperLite MSR Mount Warne 8551M: HyperLite MSR Mount Matte Black 30mm MSR Height Black